LS Monitor Unit
The AMM10S would be typically used by a programme producer to simultaneously monitor a number of audio sources or reverse talkback feeds.
- 10 XLR3 line-level inputs with individual mix controls.
- Signal presence LED on each input.
- Overall loudspeaker level control and cut switch.
- External control inputs for loudspeaker dim & cut for use in 4-wire talkback applications.
- 5W internal loudspeaker with outputs for powered and unpowered external loudspeakers.
- 6.35mm headphone jack for both A and B gauge plugs.
Line Inputs | |
Input Impedance | 10k ohm transformer coupled on XLR3F connectors |
Maximum Sensitivity | -10dBU for full power at L.S. |
Monitor Line Output | |
Output Impedance | 100 ohm active balanced on XLR3M connectors |
Maximum Gain | +16dB |
L.S. Output / Internal L.S. | |
Maximum Power | 5W at clipping in 8 ohm (+20dBU unbalanced at EXT LS output) |
Power Input: Standard Mains Power | |
Connector | IEC plug |
Supply Voltage | 100 - 240V AC, 15W |
Physical | |
Dimensions | W482mm H44mm D210mm (1U) |
Weight | 2.6kg |
Finish | Dark grey front panel |